SIB164B-Hamamatsu H7546B / H12428 Series PMT Sensor Interface Board
發布時間: 2020-06-18 12:32
Vertilon
The SIB164B multianode photomultiplier tube interface board provides the mechanical and electrical connectivity between the Hamamatsu H7546B and H12428 64 anode PMTs and external signal processing electronics such as Vertilon’s
PhotoniQ multichannel data acquisition systems. The PMT is mounted to the bottom side of the SIB164B through 76 socket pins that connect the device’s 64 anode signals, high voltage
input, and last dynode output to the board. The anode signals are routed to two connectors located on the top of the board that each connect to a specialized high density coaxial cable
assembly. This arrangement allows the SIB164B to be conveniently mounted directly into the user’s optical setup with the PMT facing outward from the bottom of the board and the sensor interface board (SIB) cables exiting from the top. The SIB cables carry the 64 anodes from the PMT to the PhotoniQ where the charge from each is separately integrated, digitized, and sent to a PC for display or further signal processing. The negative high voltage bias to the PMT’s cathode is supplied directly from the PhotoniQ on a high voltage cable to a dedicated connector on the SIB164B. For applications utilizing the last dynode output of the H7546B or H12428, the SIB164B includes a two stage high speed preamplifier whose output is available on an SMB connector. When specialized timing and triggering are required, this output can be connected to a separate external discriminator and triggering electronics. Alternatively, for more general purpose applications when the trigger requirements are not as stringent, one of the two on-board discriminators can be used. A leading edge and zero slope discriminator — which respectively generate trigger signals based on a threshold and pulse peak — are available to the user. Several adjustments are included for optimizing preamp gain, discriminator gain, and discriminator energy thresholds. The full functionality and operation of the SIB164B is conveniently controlled through the PhotoniQ’s graphical user interface. Intelligent software in the PhotoniQ constantly monitors the status of its SIB connectors to determine the type of sensor interface board attached to them. Once recognized, a dialog box specific to the recognized SIB is made available in the GUI through which the user has complete control over its operation. SIB164B multianode photomultiplier tube interface board 特點：
Interfaces to Hamamatsu H7546B and H12428 64 element 8 x 8 MAPMT
Provides mechanical and electrical connectivity
Includes last dynode high gain/bandwidth preamplifier with separate output
Two on-board discriminators for last dynode triggering
Compatible with PhotoniQ models IQSP482 and IQSP582
Connects to PhotoniQ using two separately ordered SIB cables
Includes high voltage connector for photocathode bias
Simplified control through PhotoniQ graphical user interface
SIB164B multianode photomultiplier tube interface board 
